Modems

ASROCK P4DUAL-915GL SATA DRIVER

For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink. Ratio Actual Value This is a read-only item, which displays the ratio actual value of this motherboard. If the jumpers JL1 and JR1 are short, both the front panel and the rear panel audio connectors can work. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

Uploader: Kedal
Date Added: 11 September 2010
File Size: 33.60 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 94212
Price: Free* [*Free Regsitration Required]

Sarock remember to remove the jumper cap after clearing the CMOS. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and the likeeven if ASRock has been saga of the possibility of such damages arising from any defect or error in the manual or product.

Although this motherboard offers stepless control, it is not recommended to perform over-clocking.

ASRock P4Dual-915GL – motherboard – micro ATX – Socket 478 – i915GL

Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page saha for proper installation. If those USB 2.

Last Drivers  CM1312NFI DRIVERS FOR WINDOWS 10

This is an average score out of 10 left by our most trusted members. Remove the bracket facing the slot that you intend to use. Subscription auto-renews at the end of the term Learn asrock p4dualgl.

Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again.

ASROCK P4DUAL-915GL DRIVERS FOR WINDOWS 7

Otherwise, it will operate at single channel mode. This allows you to enjoy the benefits of Surround Display feature. Page 26 This allows you to enjoy the benefits of Surround Display feature. Do NOT place jumper caps over these headers and connectors.

Make sure p4dual-195gl red-striped side of the cable is plugged into Pin1 side of the connector. If the jumpers JL1 and JR1 are short, both the front panel and the rear panel audio connectors can work.

Carefully insert the CPU into the socket until it fits in place. It’s a community-based project which helps to repair anything. Ring-In Power On Use this item to enable or disable Ring-In signals to turn on the system saya the power-soft-off mode. The default value of this option is [MB]. Please connect a CPU fan cable to this connector and match the black wire to the ground pin. Page of 37 Go. View all discussions Login to join the discussion!

Last Drivers  GIGAWARE 25-1197 DRIVER

ASRock P4DualGL, Socket , Intel Motherboard | eBay

Setting wrong values in below sections may cause system to malfunction. Future Proof My PC. For audio output, this motherboard supports 2-channel, 4-channel, 6-channel, and 8-channel modes. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.

Please check the table on page 12 for proper connection. List item the third Press asrock p4dualgl twice to finish your list. For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink. Supports up to 4 SATA devices at 1. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

ASRock > DualGL

For microphone input, this motherboard supports both stereo and mono modes. This is asroc so that you can write or read data from the hard disk.

Please connect an ATX power supply to this connector. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord, then use a jumper cap to short the pins on CLRCMOS1 for 3 seconds.

Flexibility Option The default value of this option is [Disabled]. Operation is subject to the following two conditions: